Sustainable, Renewable, DOABLE

Sustainable, Renewable, DOABLE

SPA Treatment that loves your skin

H2Optimizer

Not only shown as a highly effective disinfectant that kills pathogens, bacteria, mold, mildew and pest it is also known to make your skin feel better. Hypochlorous acid is used for curing wounds, cleaning, sanitizing and disinfecting its also used as a biocide in many industries including farming and food manufacturing for its effective results.
Hypochlorous

Why Hypochlorous?

Hypochlorous acid is found naturally in white blood cells of mammals, including the human body.

It is non-toxic and has been used as a safe wound care solution since WWI.

Hypochlorous acid water has been found to have strong disinfection properties.

Given this and its non-toxicity, it has been identified as a useful cleaning agent and sanitizer.

Identified by the US environmental protection agency as a disinfectant effective against COVID-19, backed by clinical studies because of its ability to penetrate pathogens’ membranes, it is also used as a commercial deodorizer

Futurewell H2Optimizer Benefits

For saliva swab the device requires using our proprietary swab adaptor and supplied sterile swab.
NOTE: The kit is not reusable; the testing kit should be discarded according to local regulations and authority (waste, bio-waste, or possibly even recycling).

Keeps the pool free from unwanted biological impurities.

Been know to kill pathogenic microorganisms that are present in the water.

Naturally creates chlorine

Lowers PH-Oxidizes water

Breaks down organic materials

Been known to kill all Molds and Mildews in minutes

Hypochlorous
h2optimizer
pool mom

How to Get?

Fill out the form below to get your free COVID-19 In-House rapid testing today

Who can benefit?

Personal Use

Private businesses

Schools

This product is intended for use in controlling bacteria and algae in swimming pools. This product should be added directly to the surface of circulating water according to the directions. Re-entry into treated swimming pools is prohibited above levels of 3 ppm chlorine.

Startup – Before using this product, make sure that the filtration system is clean and operating properly.
Adjust the pH of the water to the range of 7.2-7.6 using suitable products and a reliable test kit.
Adjust the alkalinity of the water to a minimum of 125 ppm (mg/L), based on the test kit reading.

Add a sufficient amount of this product directly to the surface of circulating water to raise the free available chlorine level in the water to 5-6 ppm (mg/L), based on reading from a suitable test kit. The addition of 10 ounces of this product per 10,000 gallons of water (7.5 grams per 1,000 liters) will provide approximately 5 ppm (mg/L) of available chlorine.

Shock treatment – The pool water should be super chlorinated or shocked every seven days or whenever the combined chlorine level is above 0.5 ppm (mg/L). Combined chlorine is the difference between total and free chlorine, as measured by a suitable test kit.

Add a sufficient amount of this product directly to the surface of circulating water to raise the available chlorine level to 5-6 ppm (mg/L), based on test kit readings. The addition of 10 ounces of this product per 10,000 gallons of water (7.5 grams per 1,000 liters) will provide approximately 5 ppm (mg/L) of available chlorine. If the combined chlorine reading is not below 0.5 ppm (mg/L) and the water has not been restored to its normal clarity, repeat the shock treatment described above. Do not enter water until free available chlorine reading is below 3 ppm (mg/L), combined chlorine is below 0.5 ppm (mg/L) and the water is restored to its normal clarity.

Maintenance treatment – Add this product daily or as needed to maintain the free available chlorine level in the water at 1-3 ppm (mg/L) as indicated by a reliable test kit. The addition of 2 ounces of this product per 10,000 gallons of water (1.5 grams per 1,000 liters) will provide approximately 1 ppm (mg/L) of available chlorine. Weather and usage effect sanitizer levels. In addition, some oils, lotions, fragrances, cleaners, etc. may cause foaming or cloudy water as well as reduce the efficiency of this product. Maintain the pH at 7.2-7.6 and the alkalinity at a minimum of 125 ppm (mg/L). When the total dissolved solid (TDS) reaches 3000 ppm (mg/L) or whenever the water becomes difficult to manage, the water should be drained, and fresh water added to the pool. Winterizing – Thoroughly clean and vacuum the pool. While the water is still clear and clean, apply 16 ounces of this product for each 10,000 gallons of water (12 grams per 1,000 liters), while the filtration system is running. This will increase the available chlorine by approximately 8 ppm (mg/L). Cover pool, prepare heater, filter and heater components for winter by following manufacturers’ instructions.

This product is intended for use in controlling bacteria in spas, hot tubs, Hubbard, immersion, and hydrotherapy tanks. This product is also highly eff controlling and destroying algae in outdoor spas and hot tubs. This product should be added directly to the surface of circulating water according to the directions.

SPA AND HOT TUB DISINFECTION Startup
– Before using this product, make sure that the filtration system is clean and operating properly. Adjust the pH of the water to the range of 7.2-7.6 and the alkalinity of the water to a minimum of 125 ppm (mg/L), using suitable products and reliable test kits. For bather safety, it is not recommended that water temperatures exceed 104°F (40°C).
Add a sufficient amount of this product directly to the surface of circulating water to raise the free chlorine level in the water to 5-6 ppm (mg/L), based on suitable test kit readings. The addition of one ounce of this product per 1,000 gallons (0.75 grams per 100 liters) of water will increase the available chlorine by 5 ppm (mg/L). Shock treatment – After each use, the water should be super chlorinated or shocked. Add a sufficient amount of this product directly to the surface of circulating water to raise the available chlorine level to 5-6 ppm (mg/L), based on test kit readings. The addition of one ounce of this product per 1,000 gallons (0.75 grams per 100 liters) of water will increase the available chlorine by 5 ppm (mg/L). If the combined chlorine reading is not below 0.5 ppm (mg/L) and the water has not been restored to its normal clarity, repeat the shock treatment described above. Combined chlorine is the difference between total and free chlorine, as measured by a suitable test kit
Maintenance treatment – Add this product daily or as needed to maintain the free available chlorine level in the water at 3- 5 ppm (mg/L) as indicated by a suitable test kit. The addition of 0.5 ounce of this product per 1,000 gallons of water (0.38 grams per 100 liters) will increase the available chlorine by 2.5 ppm (mg/L). Weather and usage effect sanitizer levels. In addition, some oils, lotions, fragrances, cleaners, etc. may cause foaming or cloudy water as well as reduce the efficiency of this product. Maintain the pH at 7.2-7.6 and the alkalinity at a minimum of 125 ppm (mg/L). When the total dissolved solid (TDS) reaches 3000 ppm (mg/L) or whenever the water becomes difficult to manage, the water should be drained, and the spa/hot tub thoroughly cleaned before adding fresh water.
HUBBARD AND IMMERSION TANKS
Add 5 oz. of this product for each 1,000 gallons (3.75 grams per 100 liters) of water to obtain an available chlorine level of 25 ppm (mg/L), as measured by a suitable test kit. Adjust and maintain the pH at 7.2-7.6. After each use, drain the tank. Add 1 oz. to a bucket of water and circulate this solution through the agitator of the tank for 15 minutes and then rinse out the solution. Clean the tank thoroughly and dry with clean cloths.
HYDROTHERAPY TANKS
Add this product daily or as needed to maintain the free available chlorine in the water at 1 – 3 ppm (mg/L) as indicated by a suitable test kit. The addition of 0.5 ounce of this product per 1,000 gallons (0.38 grams per 100 liters) of water will increase the available chlorine by 2.5 ppm (mg/L). Adjust and maintain the pH at 7.2-7.6 and the alkalinity at a minimum of 75 ppm (mg/L). Operate the filtration system continuously. Drain the tank weely and clean thoroughly before refilling.

This product is intended for use in controlling bacteria and algae in residential ornamental fountains and similar aquaria. This product should be added directly to the surface of circulating water according to the directions.

It should be noted that very low levels of chlorine can be highly toxic to certain fish and other aquatic species.

Startup – Before using this product, make sure that the system is clean, and the circulation system is operating properly.

Add a sufficient amount of this product directly to the surface of circulating water to raise the available chlorine level to 5-6 ppm (mg/L), based on suitable test kit readings. The addition of one ounce of this product will provide about 5 ppm (mg/L) of available chlorine to 1,000 gallons of water (0.75 grams per 100 liters).

Shock treatment – The water should be super chlorinated or shocked every two weeks or whenever the combined chlorine level is above 0.5 ppm (mg/L). Combined chlorine is the difference between tota/and free chlorine, as measured by a suitable test kit.

Add a sufficient amount of this product directly to the surface of circulating water to raise the free chlorine level to 5-6 ppm (mg/L), based on test kit readings. The addition of one ounce of this product will provide about 5 ppm (mg/L) of available chlorine to 1,000 gallons of water (0.75 grams per 100 liters). If the combined chlorine reading is not below 0.5 ppm (mg/L) and the water has not been restored to its normal clarity, repeat the shock treatment described above.

Maintenance treatment – Add this product daily or as needed to maintain the available chlorine in the water at 1-3 ppm (mg/L) as indicated by a reliable test kit. The addition of 0.5 ounce of this product will provide about 2.5 ppm (mg/L) of available chlorine to 1,000 gallons of water (0.38 grams per 100 liters). Weather and organic debris will affect sanitizer levels and usage.

Get a Quote Today

Order now and we will send your Futurewell H2Optimizer right away.